Electrician in Burnaby, BC
Panel and service upgrades, EV chargers, heat pump circuits, knob-and-tube and aluminum wiring, suite and laneway wiring, and repairs across Burnaby. One licensed electrical contractor, who looks at the panel before quoting, pulls the permit and coordinates the BC Hydro side.
Burnaby is two cities electrically. One is the tower city of Metrotown, Brentwood and Edmonds, where most electrical calls happen inside strata buildings: an EV charger in a parkade that needs strata approval and a load-managed circuit, a kitchen renovation that needs a circuit the suite panel cannot spare, or a breaker that keeps tripping. The other is the detached houses spread across Burnaby's hills: 1920s to 1950s houses in Burnaby Heights and Capitol Hill with traces of knob-and-tube and old fuse panels, post-war and 1960s to 1970s houses toward Edmonds and the South Slope where aluminum wiring and tired 100-amp panels turn up, and new rebuilds that want 200 amps from day one. Many of those houses have a basement suite, and more are adding heat pumps, which brings panel capacity into almost every conversation. This line reaches one licensed electrical contractor working across Burnaby.
Electrical Work We Take On in Burnaby
Panel and service upgrades, Level 2 EV chargers, heat pump and air conditioning circuits, knob-and-tube and aluminum wiring remediation, secondary suite and laneway home wiring, and electrical repairs. Houses, suites, townhouses and strata units.
Panel & Service Upgrades
Fuse panels and full 100-amp panels replaced, services upgraded to 200 amps where the load calls for it, with the permit and the BC Hydro side handled.
Learn more →
EV Charger Installation
Level 2 home chargers in garages, driveways and strata parkades, sized to your panel with a load calculation and load management where it saves a service upgrade.
Learn more →
Knob-and-Tube & Aluminum Wiring
Assessment and a written plan for knob-and-tube and aluminum branch wiring, then staged or full rewiring, or rated aluminum connections, under permit.
Learn more →
Heat Pump & AC Circuits
Dedicated circuits for heat pumps, mini-splits and air conditioning, with a load calculation first so the panel can carry it, and coordination with the HVAC installer.
Learn more →
Suites, Laneway Homes & Renos
Wiring for basement suites, laneway and garden homes, kitchens, bathrooms and basements, starting with whether the service can carry a second household.
Learn more →
Electrical Repairs & Troubleshooting
Breakers that keep tripping, dead outlets, flickering lights, warm switches and storm or water damage, traced to the cause and repaired properly.
Learn more →
Electrical Work in Burnaby: Panels, Permits and Old Wiring
Hillside houses from every decade. Burnaby's detached houses span a century. The oldest, near Hastings Street in the Heights, can still have knob-and-tube in the attic and a fuse panel in the basement. Houses from the 1950s to the 1970s usually have a breaker panel that is now full, sometimes with aluminum branch wiring, and many have a suite added along the way. Newer rebuilds are a different job: large services, heat pumps, two EV chargers and lots of lighting. The first visit sorts out which kind of house you have, because the quote depends on it.
Knob-and-tube, aluminum and the insurance question. Two kinds of older wiring come up again and again in Lower Mainland houses. Knob-and-tube, the original cloth-insulated wiring on porcelain knobs, is found in houses built before about 1950; it has no ground, it was never meant to be buried in insulation, and decades of splices often hang off it. Aluminum branch wiring was used in some houses built from the mid-1960s to the late 1970s; the wire itself is not the problem so much as its connections, which loosen and heat up at receptacles, switches and breakers if they were not made with rated devices. Many insurers ask about both at renewal or when a house is sold. Neither always means a full rewire, but both need a proper assessment and a written plan.
Permits, Technical Safety BC and who can do the work. In BC, electrical contractors are licensed through Technical Safety BC, and most electrical work beyond like-for-like replacement needs a permit and an inspection. Depending on the municipality, the permit comes from Technical Safety BC or from the city's own permit office; the contractor knows which applies at your address and applies for it. A permit protects you when you sell, when you claim on insurance and when a future electrician opens the panel. A quote that says the permit is optional, or a contractor who asks you to take out the permit in your own name, is a reason to look elsewhere.
BC Hydro and service upgrades. Electricity in Burnaby comes from BC Hydro. BC Hydro supplies the service to the connection point and owns the meter; the meter base, the mast or conduit and everything inside belong to the house. For a service upgrade, the contractor takes out the electrical permit and requests the disconnect and reconnect, and BC Hydro schedules its own crew. Moving a meter, converting an overhead service to underground, or adding a separate service for a laneway or garden home goes through BC Hydro's own design process and charges, so it is raised at the quote, not discovered on the day.
Heat pumps, EV chargers and the 100-amp panel. Heat pumps, Level 2 EV chargers, induction ranges and suites all add load, and many houses here still run on a 100-amp service. Before anyone sells you a panel upgrade, a load calculation to the Canadian Electrical Code as adopted in BC shows what the service can actually carry. Sometimes the answer is a new 200-amp service; sometimes a load management device lets an EV charger share capacity without one. Heat pump rebates are listed by CleanBC Better Homes; programs change, so confirm there before counting on any amount.
Condos, townhouses and strata approvals. A large share of Burnaby lives in strata buildings, and that changes how electrical work is arranged. Inside a unit, the owner can usually arrange work on their own circuits. Anything in the parkade, the electrical rooms or on shared walls is common property and needs strata approval. For EV charging, the building's capacity is shared, and load management is often what makes it possible. The contractor can prepare what the strata council or property manager asks for and work within the building's rules for access and shut-offs.
Serving Burnaby & Surrounding Areas
Electrical contractor licensing and electrical permits are administered by Technical Safety BC, except where a municipality issues its own permits. Electricity in Burnaby is supplied by BC Hydro. Heat pump and home energy rebates are listed by CleanBC Better Homes. WorkSafeBC requires a hazardous materials survey before renovation work on buildings built before 1990. Permit questions for your address go to City of Burnaby.
Frequently Asked Questions
Do I need a permit for electrical work in Burnaby?
For most work beyond replacing a fixture, receptacle or switch like for like, yes: new circuits, panel and service upgrades, EV chargers, hot tubs, suites and renovations. The contractor applies for it and arranges the inspection.
How do I know if I need a panel upgrade?
A load calculation tells you, not the age of the panel alone. Common signs are a 60- or 100-amp service with no spare spaces, breakers that trip under normal use, a fuse panel, or plans for a heat pump, EV charger or suite.
Does knob-and-tube have to be removed?
Not always all at once, but it should be assessed, and insurers often require a plan. Live knob-and-tube that has been buried in insulation or spliced into newer circuits is usually the first part to go.
Can I put an EV charger on my existing panel?
Often, yes, with a load calculation and sometimes a load management device. If the panel is full or the service is small, the contractor shows you the options and their costs side by side.
How much does an electrician cost in Burnaby?
It depends on the job. Planning ranges are on the cost page. Every job is quoted in writing after the electrician has seen the panel and the work.
Do you work in condos and townhouses?
Yes. Work inside your unit is usually yours to arrange; anything on common property, including most parkade EV chargers, needs strata approval first, and the contractor can provide what the strata asks for.
Is this an electrical company?
This is a booking line for one licensed electrical contractor working across Burnaby. Your request goes to that contractor, not to a list or a call centre.
Ready to Get Started?
Call 778-900-9645 or send the form for a written quote for electrical work in Burnaby.