Knob-and-Tube & Aluminum Wiring · Burnaby

Knob-and-Tube and Aluminum Wiring in Burnaby, BC

An insurer's letter or a home inspection report is usually how this starts. The answer is an honest assessment and a written plan, which is rarely 'gut the house tomorrow'.

Knob-and-tube

Knob-and-tube wiring, found in houses built before about 1950, runs single conductors on porcelain knobs and through porcelain tubes. It has no ground, its insulation becomes brittle with age, and it was designed to shed heat into open air, which it cannot do once buried in attic insulation. The biggest risks are usually the decades of splices and extensions added to it, not the original runs.

The assessment finds out how much is still live, where it is, and what is connected to it. Replacement is often staged: attic and accessible runs first, then the rest as walls open for other work, with new grounded circuits fished through walls with small openings where possible.

Aluminum branch wiring

Some houses built from the mid-1960s to the late 1970s were wired with aluminum branch circuits. The usual problem is at the connections: aluminum expands and oxidizes differently from copper, so terminations on devices not rated for it can loosen and overheat. Remediation is often done by pigtailing each connection to copper with connectors approved for aluminum-to-copper use, or by replacing devices with ones rated for aluminum, rather than by rewiring the house.

Before walls open

In houses built before 1990, WorkSafeBC requires a hazardous materials survey before renovation work disturbs plaster, drywall, texture or insulation that may contain asbestos. For rewiring, the quote says how that is handled. Work is done under an electrical permit, and you get the paperwork your insurer will ask for.

Insurer asking about your wiring? Call 778-900-9645 or request a quote, or see our 2026 electrical work cost guide for Burnaby for real price ranges first.

Frequently asked questions

How do I know if I have knob-and-tube?

Look in the attic or unfinished basement for single wires on white porcelain knobs or through porcelain tubes. An electrician can confirm whether it is still live.

Is aluminum wiring dangerous?

The risk is at loose or incompatible connections, which can overheat. Properly remediated connections are an accepted fix, and many insurers accept them with documentation.

Can I stay in the house during a rewire?

Usually, yes. Work is staged so power is off only in the area being worked on, with the house back on each evening.

Request a Quote

Call 778-900-9645 or send the form and we will get back to you within one business day.

By submitting this form, you agree to be contacted by phone, text, or email about your request. You can opt out at any time. Your details go only to the one local electrician who handles your job — nobody else.

Serving Burnaby and surrounding areas. Contact us for a no-obligation quote specific to your property.

Call Now: 778-900-9645